Check Us Out Online! LP Vinyl Cleaning Machine Kirmuss KA-RC-1 Ultrasonic Record Restoration System. We are a Kirmuss Dealer! Most records only need 5 minute cycle with this RC-1. We use one to clean all records in the shop. An Affordable Solution To Maintaining And Restoring Your Vinyl Collection. GLOBALLY RECOGNIZED AS THE LEADER WITH PATENTED TECHNOLOGY DEVELOPED IN THE USA. After now 7 years of continued extensive research and trials, audiophile and business owner Charles Kirmuss developed an affordable and simple to use RECORD CLEANING AND RECORD GROOVE RESTORATION SYSTEM based on researching the record making process and the environments that records are manufactured and stored in. Studying peer products as well as the cause and effect of standing waves, cavitation, plasma drive, and the effects of like charges between water and a record, he instituted his own changes and patented embelishments, adding a 70 KHz resonance to a standard 35 KHz sonic further created a safe record suspension system. A system where records are spaced properly. Any less does not see the entire record see the cleaning and restoration action occur. TO NOTE: WATER WITH OR WITHOUT A CLEANING SOLUTION ADDED IN AN ULTRASONIC’S TANK WITH A RECORD SPINNING CANNOT SEE ANY ACTION IN THE RECORD’S GROOVES: THIS AS BOTH THE WATER AND RECORD HAVE THE SAME POSITIVE CHARGE. THAT IS WHY THE KIRMUSS PROCESS SEES THE RECORD SUBJECTED TO MULTIPLE CYCLES, AS THE IONIZING SPRAY THAT IS APPLIED TO THE RECORD CHANGES THE CHARGE OF A RECORD TO A NEGATIVE, BUT ONLY TEMPORARILY. THUS: A RECORD IS RESTORED, AND NOT JUST SURFACE CLEANED AS OTHER PROCESS DO, THIS IN 4 OR 5 CYCLES! THIS IS A PROCESS THAT GUARANTEES RESULTS! The invention is not a common sonic cleaner. Not a look alike. The Kirmuss process guarantees 1.3 to 4+ dB gain over floor from your cartridge. With ETL C US and CE Electrical and Safety Approvals our affordable system will increase your listening pleasure by removing most of those annoying unwanted pops and crackling sounds from both new and old records and giving breath to the artist and music as fungus as well as remnants of prior cleanings and release agent in that order are stripped off the record. This is NOT some home-made product! It is not a commercial cleaner look alike. To note, and as is the case with all cleaning systems: at times as the provenance of the record to be processed is unknown to either us or the record owner as to its pressing, its original grade when new, how it was played and stored, the condition of the playback needle and dyne weight, how the record was cleaned prior and with what chemicals or agents as well as their compatibility to PVC and if the record was played more than once per side in the past period of 24 hours; our process as well as other methods cannot repair the inadvertent damage caused to the record by the aforementioned. The KirmussAudio Model KA-RC-1 Revolutionizes The Way We Clean RESTORE Records. First and foremost; our Patented and Patents Pending record suspension system assures that records of any speed and size see their grooves cleaned SAFELY. No damage to the record by mechanical intrusion of skewers and the like. FOUR RECORDS AT A TIME MAY BE PROCESSED. In one session, records of varying size may be processed. Using a resonance of 70 KHz to the 35 KHz sonic results in RESTORATION. That is why the distance between records is critical in any process using an ultrasonic. Any less distance than the one offered by the KA-RC-1 between the records sees a high standing wave negating the benefits of cavitation. Secondly; only distilled water with a maximum of 40 mL (1.4 oz) of ISA (Isopropyl) 70% solution constitutes the initial de-grease bath. IT DOES NOT CLEAN THE GROOVES. The alcohol in safe quantity per the PVC Chemical Compatability Chart is used to kill the live and dormant fungus that resides on records. Only in the first 5 minute initial wetting cycle does this remove some of the surface dust, fingerprint oils, sand.. This as both the record and the water retain the same charge. In subsequent RESTORATION CYCLES of either 2 or 5 minutes, followed by a 5 minute rinse, we apply a PVC FRIENDLY, WATER SOLUBLE, anti-bacterial, anti-fungal and anti-static Ionizing Surfactant spray onto the record. When brushed in using the supplied goat hair brush, the application now changes the charge of the record with relation to the water in the ultrasonic’s tank. Thus starts the groove cleaning and groove restoration process. The 500 MPH (805 KPH) plasma wave created by cavitation is now attracted to the both the record and the record’s groove. With the plasma wave now brushing against the applied surfactant, this now first removes accumulated surface contaminants present from other cleaning systems and processes. Then as we process the records in multiple cycles, (of 2 or 5 minutes), we then finally remove the release agent found below and the contaminants that were microwelded into the grooves by the heat of the needle that were causing those unwanted pops and crackles. Ultrasonics need an ionizing surfactant to aid the plasma wave to be attracted to the record, as vinyl typically repells water. Without this, groove restoration and cleaning may not occur. Putting our agent onto a recoird or into a tank of water with any other ultrasonic for the reasons explained below will not work. DO NOT USE OUR SURFACTANT WITH OTHER ULTRASONIC SYSTEMS AS PERMANENT DAMAGE TO RECORDS MAY OCCUR. SPECIAL NOTE: With the AudioDeske system, we gum up the pump and gear mechanism. ONLY USE OUR KA-AS-1 with our system. As to determining when a record is clean and restored, our process allows you to see this first hand. As the surfactant is brushed onto the record and into the grooves over multiple 2 or 5 minute cycles, a rise and then a fall, or decrease of the appearance of a toothpaste-like substance that has been brought up by the goat hair brush is noted; this is of materials that were softened by the prior cycles of the ultrasonic cycle process as witnessed. This validates the effectiveness of the system: removing fungus, contaminants, as well as agents applied in prior cleaning methods and systems. The Last Cycle is determined when these materials rapidly evaporate or diminish in quantity. RECORDS COME OUT VIRTUALLY DRY as water is repelled by PVC. The record is clean and is RESTORED. ONE CANNOT JUST PLACE RECORDS INTO ANY ULTRASONIC MACHINE AND EXPECT WHERE EVEN AN HOUR IN A MACHINE WILL THERE BE ANY REMOVAL OF CONTAMINANTS AND THE RELEASE AGENT. Our patented discovery: Impossible due to the like charge of the record with respect to the like charge of the water in the basin, with or without a solvent solutiuon added to the water. YES WE OFFER A PROCESS, A PROCESS THAT WILL AS STATED BY THE ABSOLUTE SOUND, March 2020? , WHERE WE ARE BILLED AS A RECORD RESTORATION DEVICE; not just a (surface) record cleaner. QUOTE: You’ll be rewarded with a more spacious soundstage and truer instrumental timbre. (The KA-RC-1) does deliver results as advertised/claimed. No matter how you store and use your records they inevitably will require maintenance. When playing records, dust particles and contaminants always build up on the stylus as the tone arm moves across the record. This dulls the sound. Then, if a release agent has not been removed, any dust particles in the record’s grooves will be microwelded into the agent, resulting in those nasty “pops”. As to record health: Even new and latest pressings are subject to the same conditions as your old collection. Release agents are found on the record as a residue from the pressing process and must be removed prior to use, otherwise they attract at an alarming rate dust and other airborne contaminants. Heat generated by the contact of the stylus with the record will see micro-dust particles lodged in the grooves. (Then Microwelded into the release agent). As to release agents themselves as an explanation, there is not a spray that is applied to the pressing machine’s surface or stampers. Rather, as the PVC with plasticizers, stabilizers and liquifiers are added in the mix that are used in the record pressing and as they are heated, a type of scillic acid forms. It is during the pressing process with heat, this release agent then bubbles up to the record’s extremities and surface which by design aids in the release of the pressing from the stamper’s mother and son. This is the residue that we recommend being removed before a new record is played. It is here where in old records, dust particles and the like have been microwelded into by the heat of the needle. This then allows us to RESTORE old records to their “breath” and “magic”. As records when pressed are found to be produced in less than pristine areas and where records are played before packaging, we also remove dust hot welded into the grooves at the record pressing plant. >>>IF YOU DO NOT HAVE ONE OF OUR SYSTEMS, we suggest as a minimum where you use a CARBON FIBER BRUSH in an aluminum case having 2.5 million bristles to remove static and use a 10 micron parastatic felt brush to remove dust PRIOR TO PLAY. (We also offer the KA-B-1 combination brush asd a seperate item). Before play, use a non alcohol based liquid needle cleaner to remove dust that was collected by the needle, and to remove static. With release agent removed by our system, once every 2 or 3 years process the record with a 5 minute cycle. Use always before play as mentioned the supplied parastatic felt brush to remove dust and a carbon fiber brush to remove both dust and static. Keep restored records in our HDPE non PVC 4 mil anti-static, anti-fungal sleeves. Cleaning as offedred by our peers WILL NOT remove unwanted sounds caused by scratches on the record’s surface and depending on the age and condition of the record; even repeated cleanings may or may not restore the record to like new condition. BUT WITH GROOVE RESTORATION we now realize BETTER GROOVE CONTACT BY THE DYNE OF THE NEEDLE WITH THE GROOVES, and with Release Agent removed, light surface scratches are no longer an issue. We have noted where in 7 or 8 times out of 10 a “skid mark” from a tone arm that crossed the surface of a record may no longer be heard once we have processed a record with our system. As the needle is now better “seated” in the “pocket” of the groove. INDEED using our process, RECORDS MAY LOOK WORSE! Scratches hidden by record resellers and repackagers at times see records dressed up for sale. Many use WD40, car wax, lighter fluid. Not knowing the provenance of the record, in some cases our process will not remove all the pops and crackles, definately not needle drops, but we will reduce the overall undesirable effect previously described. The record now is “listenable” and “enjoyable”. Everyone’s An Expert! Frankly speaking, there is much nonsense published regarding the cleaning of records. Soaps, chemical mixes and brews, and especially the use of large portions of alcohol, etc.. Did we mention TERGITOL, PHOTOFLOW? These all affect the record negatively either during or after cleaning. SOME ARE ANTI-SURFACTANTS REPELLING THE ACTION OF AN ULTRASONIC. OTHERS ARE NOT SAFE TO USE ON PVC. Always before using any chemical or cleaning solution to clean a record, check its compatibility with the PVC CHEMICAL COMPATIBILITY CHART. As used in ultrasonic, manual, or vacuum record CLEANING systems, air drying or blow drying of chemicals or purported cleaning agents that are not physically/”mechanically” removed further creates issues that are cumulative over time. As well as introduction of static. These coatings, we term them as “left over residues”, see the needle ride higher in the groove and not make full contact with the left and right channels. UNLIKE OTHER CLEANING SYSTEMS, once processed with KIRMUSS, our records some out virtually dry: proving the premise of the PVC of the record repelling water! As to using non PVC friendly cleaning solutions, two issues arise. First, some of these agents actually are enzyme based and promote fungus, the enemy of the record, and while perhaps records are in fact glossy and shiny these processes remove some of the annoying pops as the needle rides higher the high frequencies and timber of the music becomes “masked”. Gone are the breath of the artist, and the soundstage. Indeed: ultrasonic cleaners have been around for decades and its use and attributes are well known and while care must also be taken as to the introduction of chemicals in the ultrasonic bath, this cleaning technology is a very valuable tool to use. Anything higher than 35KHz is detrimental to the health of the record. Nothing to do with the size of the bubble, rather the speed of the plasma wave as it hits the record. To avoid standing waves in the basin to negate cleaning and restoration, do look for a resonance at 70KHz in a 35 KHz sonic. But ultrasonic action alone is not enough. Our concern is two fold: removal of the release agent on a new record; (and the dust particles micro-welded) as well as removal of fungus as well as the many layers of previous cleaning system residues: THUS RESTORING THE RECORD. We differ from other Ultrasonic cleaning machines currently on the market in how we handle the record itself. FIRST: Properly spaced, records float safely and are not speared or squeezed, (damaging the record and label), and where a temperate distilled water bath is the “mechanical” cleaning action, (plasma wave generated through cavitation), and using water soluble and where a PVC safe IONIZING SURFACTANT AGENT is sprayed onto the surface of the record. (This to to attract the plasma wave). IT IS THE TEMPORARY CHANGE OF CHARGE OF THE RECORD WITH RESPECT TO THAT OF THE WATER AND THE MULTIPLE REPEATED CYCLES WIUTH IONIZING AGENT ON THE RECORD APPLIED REPEATEDLY THAT ALLOWS FOR THE RELEASE AGENT IN THE GROOVE TO BE REMOVED. WE SUGGEST NEVER TO USE ANY CLEANING AGENT MANUALLY OR IN ANY SYSTEM IF THERE IS NO DESCRIPTION AS TO THE MAKE-UP OF THE CLEANING AGENT. (found in the mandatory MDS data sheet). IF THERE IS A LIST OF INGREDIENTS, CONSULT A PVC CHEMICAL COMPATABILITY CHART TO SEE IF ANY OF THE CHEMICALS SUPPLIED MAY AFFECT THE HEALTH OF THE PVC RECORD. Our anti-static, anti-fungal ionizing surfactant is a diol-1-2 – 178 propanediol bi polar agent safe for PVC. To answer a question: Simply using an ultrasonic and a cleaner in the water bath and keeping a record in for hours does not see groove restoration. One must change the charge of the record over several cycles to see the onion being peeled, and record successfully restored. What Is Included With The System? AC Power Mains Lead. Combination Carbon Fiber Brush/Parastatic Felt Brush. Ionizing Surfactant serving also as an Anti-fungal/Anti-Static Spray. Goat Hair Brush to apply the surfactant onto the record. Optician’s Microfiber Cloth. Rabbit Microfiber Cloth for workstation space and drying out the rinsed goat hair brush between surfactant applications. Not Supplied but required with the system per washing session: 6 Litres of Distilled water, 40 ml (1.4 ounces) of Isopropyl Alcohol 70%. Follow us for secret sales and updates! Social Media handle = eclsounds. We’re a place for record collectors, musicians, gear junkies, specializing in vintage / new guitar effects pedals, musical equipment, rare and audiophile LP’s, 45’s, 78’s, CD’s, DVD’s, all sorts of music books, and memorabilia. We’re knowledgable, helpful, and prompt. We believe in taking exceptionally good care of our customers to ensure they get what they want, in the condition they expect. Bulkier items may take up to 2 days to process. We aim to get precise rates and not overcharge. Please inquire about any item you may seek for we have a large inventory that hasn’t seen the light of day yet. Industry standard Goldmine system is used when grading LP’s. EX is used in cases where a grade between NM and VG+ is needed. LP’s lower than NM that need to be cleaned will be done on a VPI.